VanguardSporter SS

Vanguard Sporter SS

MSRP $869.00
(Actual price may vary.)

An affordable wood stock rifle with the distinctive styling of a stainless finish. Comes with a factory-shot target as your assurance of guaranteed accuracy.

Buy Now

Overview

  • Factory-tuned, fully adjustable trigger*
  • Exceptional value in a wood stock rifle
  • Raised comb, Monte Carlo stock with satin urethane finish
  • Rosewood forend
  • Metalwork bead blasted to matte finish
  • Fineline diamond point checkering
  • 24" hammer-forged barrel
  • Low density recoil pad

* Sear engagement is factory set between .008 to .014, with let-off weight set between 2.5 and 3.8 lbs. – averaging 3.15 lbs. Additional sear engagements must be performed by a Weatherby Service Center or qualified gunsmith.

All Vanguard rifles come with a factory-shot target as proof that your rifle is guaranteed accurate (1-1/2" 3-shot group at 100 yards when used with premium [non-Weatherby calibers] or Weatherby factory ammunition).

To gain the same assurance, you would have to select and mount a scope, boresight the rifle, buy ammo, make a trip to the range and back just to be certain the rifle you bought was accurate. The factory-shot target saves you hundreds of dollars and hours of time.

Don't settle for "hoping" your rifle will be accurate. Weatherby gives you proof positive.

Specs

CaliberBarreled ActionApprox.
Weight (1)
Overall LengthMagazine Capacity (2)Barrel Length/ContourRiflingLength of PullDrop at
Comb
Drop at
Heel
Monte Carlo
.223 Rem.RH 24"7 3/4 lbs.44"5+124" #21-12"13 5/8"5/8"1 1/8"3/8"
.22-250 Rem.RH 24"7 3/4 lbs.44"5+124" #21-14"13 5/8"5/8"1 1/8"3/8"
.243 Win.RH 24"7 3/4 lbs.44"5+124" #21-10"13 5/8"5/8"1 1/8"3/8"
.270 Win.RH 24"7 3/4 lbs.44 1/2"5+124" #21-10"13 5/8"5/8"1 1/8"3/8"
.308 Win.RH 24"7 3/4 lbs.44"5+124" #21-12"13 5/8"5/8"1 1/8"3/8"
.30-06 Sprg.RH 24"7 3/4 lbs.44 1/2"5+124" #21-10"13 5/8"5/8"1 1/8"3/8"
.257 Wby. Mag.RH 24"7 3/4 lbs.44 1/2"3+124" #21-10"13 5/8"5/8"1 1/8"3/8"
.270 WSMRH 24"7 3/4 lbs.44"3+124" #21-10"13 5/8"5/8"1 1/8"3/8"
7mm Rem. Mag.RH 24"7 3/4 lbs.44 1/2"3+124" #21-9 1/2"13 5/8"5/8"1 1/8"3/8"
.300 Win. Mag.RH 24"7 3/4 lbs.44 1/2"3+124" #21-10"13 5/8"5/8"1 1/8"3/8"
.300 WSMRH 24"7 3/4 lbs.44"3+124" #21-10"13 5/8"5/8"1 1/8"3/8"
.300 Wby. Mag.RH 24"7 3/4 lbs.44 1/2"3+124" #21-10"13 5/8"5/8"1 1/8"3/8"
.338 Win. Mag.RH 24"7 3/4 lbs.44 1/2"3+124" #21-10"13 5/8"5/8"1 1/8"3/8"

Specifications subject to change without notice. (1) Weight approximate. Varies due to stock density and bore diameter. (2) Magazine capacity plus one round in chamber. (3) Available with Weatherby Accubrake™ only. (4) Measurement includes Accubrake.

* Designates models that are designed for left-handed shooters.

Competitive Advantage

FeaturesWeatherby Vanguard SyntheticHowa M-1500 LightningBrowning Composite StalkerRemington SPSSavage 11FTikka T3 Lite
Accuracy GuaranteeYes – 1.5" or less NoNoNoNoYes – 1"
Factory-Shot TargetYesNoNoNoNoNo
Number of Calibers14141781417
Adjustable TriggerYesYesYesFactory AdjustableYesYes
Weight7.5 lbs.7.5 lbs.6.25-7.25 lbs.7.25-7.5 lbs.6.25-6.75 lbs.7-7.5 lbs.
Country of OriginJapanJapanJapanUSAUSAFinland
MSRP (non-magnums)$499 $499 $815 $620 $564 $625
MSRP (magnums)$499 $550 $846 $653 $564 $640
MSRP (other calibers)WSM: $509N/AWSSM: $770N/AN/AN/A

Performance

Cocking Indicator — Allows you to instantly see whether rifle is cocked or uncocked. An important safety feature.

Fully Enclosed Bolt Sleeve — Completely enshrouds rear of action to redirect high-pressure gases and brass particles in the event of a case rupture.

Three Rings of Steel — The cartridge casehead is surrounded by the recessed bolt face, which is surrounded by the barrel, which is surrounded by the machined steel receiver. Creates an extra measure of strength and structural integrity.

Cold Hammer Forged 24" Barrel — Maximizes velocity and produces a guaranteed 1 1/2" OR BETTER 3-shot group at 100 yards when used with premium (non-Weatherby calibers) or Weatherby factory ammunition. 20" and 22" barrels available on some models.

Integral Recoil Lug — One-piece machined receiver features integral recoil lug for the utmost in strength and structural integrity.

Monte Carlo Stock — Injection-molded composite delivers superior accuracy and durability. Monte Carlo design with raised comb is cast off to allow for quicker eye-to-scope alignment and faster target acquisition, while reducing felt recoil. Dual tapered forearm (back and upward) provides better grip and control under recoil and is flat-bottomed for a steady, stable rest. Low-density recoil pad greatly increases shock absorption and reducing felt recoil.

One-piece Forged Bolt — Provides maximum strength and structural integrity. Knurled bolt knob adds to the functionality and value.

Fluted Bolt Body — Features three gas ports to allow high-pressure gases to escape laterally in the event of an accidental case rupture. Longitudinal flutes reduce weight and bearing surface area, while minimizing binding for smooth action.

Factory-Tuned, Fully Adjustable Trigger — Our newly enhanced trigger system is fully adjustable for sear engagement and is factory set between .008 to .014. NOTE: As a point of reference for the precision of our trigger, the average thickness of a page in this catalog is .004. Let-off weight is factory set between 2.5 and 3.8 lbs. – averaging 3.15 lbs. Sears and triggers are hand-honed to provide an ultra-smooth surface to eliminate trigger creep. Each trigger is manually inspected and tuned to assure a clean, crisp trigger that will break precisely, improving shooter accuracy. (Additional sear engagement adjustments must be performed by a Weatherby Service Center or qualified gunsmith). A special grooved trigger shoe surface provides better “feel” and control.

Hinged Floorplate — One-piece bottom metal and hinged floorplate provides easy access to unfired cartridges in the magazine. Constructed of steel and lightweight alloy.

FAQ

Can I send my rifle back to Weatherby for rebluing and installation of a new stock?

Yes - your rifle can be sent to Weatherby for refurbishing or modification.

Does Weatherby have an accuracy guarantee, and what should I do if my rifle does not shoot within the guarantee?

All Weatherby (Mark V® and Vanguard®) rifles are guaranteed to shoot a 1 1/2" (or better) 3-shot group at 100 yards from a cold barrel when used with Weatherby factory ammunition. For Weatherby rifles chambered in non-Weatherby calibers, the guarantee is effective when premium loads are used. All Weatherby® Vanguard rifles come with a factory-shot, 3-shot target as your assurance of accuracy. If for some reason your rifle does not shoot within the guarantee, Weatherby advises you to send the rifle to a Weatherby-authorized service center. After being tested by the service center, if indeed it does not shoot within the guarantee and the rifle has not been altered, the service center will repair the rifle under warranty, or forward it to the factory for inspection and replacement approval, if deemed necessary.

Select models (SUB-MOA) are guaranteed to shoot .99" or less at 100 yards when used with specified Weatherby factory or premium ammunition (3-shot group).

Weatherby offers rifles in standard caliber chamberings. Do they make ammunition for them?

Weatherby currently manufactures ammunition for Weatherby Magnum calibers only, and has no intentions to manufacture on an ongoing basis standard cartridge ammunition. Weatherby recommends you purchase premium standard cartridge ammunition from a high quality ammunition manufacturer.

NOTE:  Weatherby did produce a small run of non-Weatherby caliber ammunition in 1997. Calibers included: .270 Win., .30-06 Spfd., 7mm Rem. Mag., .300 Win. Mag., .338 Win. Mag., and .375 H&H Mag.

Will Weatherby ever make left-handed rifles again, if so what calibers?

All Weatherby Mark V® rifles (.257 Wby. Mag. - .460 Wby. Mag.) can be ordered as a left-hand model. For more information, please call the Weatherby Custom Shop at (805) 227-2600.

My gun needs service. Where do I send it?

There is a list of Weatherby authorized service centers located on this web site. We recommend you send it to the service center nearest you.

What is the difference between the Vanguard and the Mark V rifles?

 

  Mark V Magnum Mark V Standard Vanguard
Locking Lugs Nine Six Two
Bolt Lift 54 Degrees 54 Degrees 90 Degrees
Bolt Release Pull Trigger Pull Trigger Side Release
Magazine Capacity 2+1 in .378 & up; 3+1 in .257 through .375 H&H 5+1
4+1 in .22-.250 Rem.
3+1 in .257 Wby. Mag., .270 WSM., 7mm Rem. Mag., .300 WSM., .300 Wby. Mag., .388 Win. Mag., 5+1 in .223 Rem, .22-250 Rem., .243 Win., .270 Win., .308 Win. and .30-06 Spfd.
Floorplate Release Located on the inside of the trigger guard Located on the inside of the trigger guard Located on the outside of the trigger guard
Can I send my rifle back to Weatherby to have an Accubrake installed?

There are Weatherby-authorized Accubrake installation centers located across the United States. You can have an Accubrake installed on your rifle at any one of these centers or in the Weatherby Custom Shop in Paso Robles, CA. The work done by these centers is the same as would be done by the factory and the warranty of the rifle would still be in place. A list of these authorized installation centers can be found on this web site or you can call Weatherby for a list.

Does Weatherby still make rifle scopes? If not, what scope do they recommend?

Weatherby no longer manufactures scopes, nor do we promote any particular brand of scope. We do recommend, however, due to the amount of recoil sometimes experienced with the larger magnum rifles, you choose a well-made, high quality scope.

When was my Weatherby firearm manufactured?

You can learn the history and lineage of your Weatherby firearm, researched and authenticated through the Weatherby company records. You’ll receive an embossed letter of authenticity which verifies the country of origin, the date your firearm was shipped, where the firearm was originally delivered and a list of features, including any custom embellishments. Each certificate is personally signed by Roy E. Weatherby, Jr., President, and Dean Rumbaugh, Company Historian. Cost for each serial number search is $50 ($75 for Custom rifles, $100 for Special Edition or Commemorative rifles). You may print and mail the Authenticity Order Form or for information, write Company Historian, 1605 Commerce Way, Paso Robles, CA 93446.

Additional historical information can also be gathered from Weatherby. The Man. The Gun. The Legend. This 290-page biography, written by Grits and Tom Gresham, contains a tremendous amount of historical information that you may find valuable in the search for your firearm’s history. Standard hardbound copies are just $30.00. Proceeds benefit the Weatherby Foundation International. See your Weatherby dealer today or order online.

Where can I obtain loading data for Weatherby cartridges?
Hornady
P.O. Box 1848
Grand Island, NE 68802-1848
(800) 338-3220
Nosler, Inc.*
P.O. Box 671
Bend, OR 97709
(800) 285-3701
Barnes Bullets Co.*
P.O. Box 215
American Fork, UT 84003
(800) 574-9200
email@barnesbullets.com
Accurate Arms Co., Inc.*
5891 Highway 230 West
McEwen, TN 37101
(615) 729-4207
Sierra Bullets
P.O. Box 818
Sedalia, MO 65302-0818
(660) 827-6300
sierra@sierrabullets.com
Speer, Inc.
P.O. Box 856
Lewiston, ID 83501
(800) 666-5761

* Newest editions contain loading data on the .30-378 Weatherby Magnum and .338-378 Weatherby Magnum.

What is Weatherby’s warranty policy?

The Weatherby service policy reads as follows:

“Weatherby is a name that has been synonymous with quality firearms for over 60 years. All Weatherby firearms are manufactured of the finest materials, and have been thoroughly inspected and tested in every phase of production.

Because of the confidence we have in our products, Weatherby does not provide a written warranty, but rather stands behind its reputation for customer service and satisfaction.

Simply stated, we will consider requests for service or repair of Weatherby firearms on a case-by-case basis. A determination will be made, taking into consideration such things as the age and condition of the firearm, and the circumstances surrounding its malfunction or other problem.

Weatherby will not be responsible for defects resulting from ordinary wear and tear, alterations by unauthorized persons, accidents, misuse, use of incorrect or other than factory-loaded ammunition, or failure to provide reasonable and normal maintenance.

Should any Weatherby firearm require service or repair under this service policy, it must be delivered transportation prepaid to an authorized Weatherby Service Center. The product must be accompanied by a proof of purchase, and a letter explaining the problem. The rifle should also be insured by the owner at time of shipment, as Weatherby, Inc. can accept no responsibility for damage or loss in transit. Weatherby will pay all charges to return the product to the owner if it is accepted for service or repair under the provisions of this policy.”

We also invite you to see what other hunters and shooters are talking about at Weatherby Nation.

Join the Conversation

http://www.weatherby.com

Want to take full advantage of Weatherby.com? Sign in or register for an account.

Choose your preferred purchasing option.

Buy NowORFind a Dealer

The Weatherby web site was designed for optimal browsing at a screen resolution of 1024 x 768. It appears that your monitor is set for a lower resolution. For best results, we recommend changing your screen resolution. For PC instructions, click here. For Mac, click here.

If you would like to place an order at the Weatherby Store, please call (805) 227-2600.